Product Description
JBA Offroad Standard High Caster Upper Control Arms | 1-3.5" Lift (FJ Cruiser 2007-2014)
The JBA Upper Control Arms are compatible with MOST spring lifts and leveling kits on the market today! Works with spring lifts up to 3.5 inches.
The JBA Value Pack
- JBA Max 90 Ball Joints™
- Patented JBA EZ Lube Bushings™
- JBA Lifetime Warranty
- JBA 365-day Return Policy
- JBA Installation Book
- JBA Stickers
JBA Upper Control Arms are preassembled and ready to bolt onto your FJ!
American-made steel tubing, red powder-coat finish, replaceable ball joints, 2 grease ports for the JBA EZ lube bushings, and 1 grease port for the ball joint. Ball joints are mounted on an angle to line up with the steering knuckle.
Fits Lift Type:
Spacer Lift, or Leveling kit: These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.
- Coil Spring spacer
- On-top strut spacers
- Preload Collar
- Bilstein 5100 Series, adjustable struts
- Bilstein 6100 Series, adjustable struts
- Using lift springs on struts
- Higher-rate strut springs
- Adjustable coil over struts
Spring lift kit: These kits cause the upper arms to angle downward toward the ball joints. Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"
- Coil Spring spacer
- On-top strut spacers
- Preload Collar
- Bilstein 5100 Series, adjustable struts
- Bilstein 6100 Series, adjustable struts
- Using lift springs on struts
- Higher-rate strut springs
- Adjustable coil over struts
Maintenance:
Every 3,000-5,000 miles: Grease the ball joint with lithium complex grease fortified with moly, until you see the boots swell (3-4pumps). Grease the arm bushings with the same grease until you see grease pushing out from the EZ Lube ports.
Notes:
** Using ball joint spacers voids the JBA Money Back and Replacement Warranty
*** Left and right UCAs are not symmetrical
