Motobilt 4 Link Suspension Bracket & Skid Kit | 4 Door (Wrangler JL 2018+)

Motobilt 4 Link Suspension Bracket & Skid Kit | 4 Door (Wrangler JL 2018+)

Ready to transform your Jeep JL Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles & coil-over shocks or ORI Struts? Want to be able to run up to 42" tires? We have the ultimate solution to transform your Jeep JLU into an off-roading monster!

Our MB7006 4 Link Suspension Bracket & Skid System for Jeep JLU takes all of the geometry guesswork out of your build. Our kit includes all of the frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension and either a triangulated 4 link front suspension or 3 link front suspension with track bar.

The rear frame on a Jeep JLU is narrower than a Jeep JK, thus, a back half frame is not necessary in order fit coil-over shocks or ORI struts. We separately offer rear shock mounts (MB1562) that work seamlessly with this 4 link bracket kit & provide the clearance & height required to install your rear shocks.

All front brackets are located using factory frame hole locations for ease of installation. The rear brackets key into the new rear cross member & are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame.

All mounting points for the skid plate have machined threaded holes in their mating structures. No need for fish plates or nuts to remove the skid plate.

Kit Includes:
- HD removable transmission crossmember
- 1/4" thick skid plate
- Rear frame crossmember
- Joint plates
- Necessary hardware
- Installation instructions

• Takes all of the guesswork out of your build
• Allows for the choice of 3 link front suspension or 4 link front suspension with full hydro steering
• Allows you to run an aftermarket transfer case
• Removable belly skid for full access to transfer case
• Flush mounted large access plate in engine skid
• Countersunk bolt heads in skid plates
• 3 or 4 link capable
• True double triangulated rear suspension ready
• Protection of vulnerable and expensive components
• Easy to customize

Notes:
** Passenger mounted factory fuel tank will be omitted and moved to the rear. Please contact us for rear mounted aluminum fuel tanks, steel skid & EVAP modification kits
*** All front & rear brackets are designed to accept 2-5/8" wide joints. All joint mounting holes measure 5/8" diameter which you can drill to a larger diameter if you choose.
**** PLEASE ALLOW A LEAD TIME OF 6-8 WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY AND ACCURATE LEAD TIMES. 
***** This kit requires professional welding of kit components to factory frame. Offroad Elements Inc & Motobilt Inc. are not responsible for incorrect installation

Fits:
Jeep Wrangler JL 4 Door Unlimited (2018+)