Loading... Please wait...
  • TeraFlex 1958350 SpeedBump Front & Falcon Progressive Rear Bump Stop Kit 0-4.5" of Lift for Jeep Wrangler JL 2018+

TeraFlex SpeedBump Front & Falcon Progressive Rear Bump Stop Kit- 0-4.5" Lift (Wrangler JL 2018+)

$569.99
SKU: TER-1958350
Brand:
TeraFlex
Weight:
12.00 LBS
Shipping:
Calculated at checkout
Qty

    TeraFlex SpeedBump Front & Falcon Progressive Rear Bump Stop Kit 0-4.5" for JL

    These innovative TeraFlex SpeedBump Front & Falcon Progressive Rear Bump Stops meet the demand of high-performance driving. Composite construction combined with a progressive nature reduces suspension compression impacts and harshness when bottoming out whether driving off-road or on poorly maintained highways. Reducing this impact increases driver ability to maintain vehicle control as well as reduces the risk of bending an axle housing tube.

    TeraFlex SpeedBump Front Bump Stops feature a self-lubricating Delrin acetal resin polymer shaft to withstand 1,000s of continuous cycles without wear or abrasion. The external shaft seal prolongs shaft life by wiping and cleaning the shaft to prevent contaminants from entering the SpeedBump housing.

    Falcon Progressive Rear “Foam” Bump Stops are constructed from a performance-tuned closed-cell nitrogen charged microcellular polyurethane technology that will not fade or dissipate under extended heavy use to maintain its progressive nature. This material is unaffected by temperature extremes and retains its flexibility under thermal or sub-zero temperatures.

    These bump stops feature a simple bolt-on installation. Simply requires removal of the factory bump stop bell with no welding required. Additionally, these maintenance-free SpeedBump Bump Stops don’t require any adjustment or tuning.

    Kit Includes:
    - SpeedBump Front Bump Stop Kit
    - 1.25" Front SpeedBump Lower Bump Stop Pad Kit- 3 Pairs
    - Falcon Progressive Rear "Foam" Bump Stop- pair
    - 2" rear bump stop strike pads- pair
    - Rear bump stop bracket mounting plate- pair
    - Rear bump stop bracket mounting strap- pair
    - Necessary hardware
    - Installation instructions

    • JL/JLU specific tuned for high-speed performance 
    • Absorbs large impact energy progressively during compression to prevent bent axle tubes 
    • Quiet movement and function (no pad-slap clunk) 
    • Maintenance-free, all composite construction 
    • Resistant to all types of environmental conditions (mud, salt, sand, dust, etc.) 
    • Subzero temperature flexibility reduces fatigue 
    • Compatible w/ all suspension systems that retain factory axle spring mounting locations 
    • Simple installation – no welding required 
    • Patented technology 
    • Limited lifetime warranty
    • Estimated installation time: 5 hours

    Notes:
    ** Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders – See instructions for proper configuration for your application.

    Fits:
    Jeep Wrangler JL 2 Door (2018+)
    Jeep Wrangler JL 4 Door Unlimited (2018+)

     

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    Sign up for our newsletter

    View Cart Go To Checkout