Synergy 2" Rear Coil Springs (Gladiator JT 2020+)
Synergy 2" Rear Coil Springs for JT
Synergy Jeep JT Multi-Rate Rear Lift Coil Springs. Synergy has designed these springs from a clean sheet for the new Gladiator platform. All springs are multi-rate and have been designed to make a great platform even better. These springs are unique to the JT and not shared with any other vehicles. Multi-rate design has a soft initial rate which prevents the spring from coming loose, even with long travel shocks. The ride rate is the average of the OEM spring rates to maintain adequate payload and towing capacity. Springs are proudly manufactured in the United States of the highest quality steel. Springs are designed to be able to set solid (fully collapse) without overstressing the material and are pre-set from the factory meaning the springs will never sag or set.
- One (1) pair of rear coil springs
- Increases ride quality
- Increases wheel travel, articulation and traction
- No spring bowing
- Collapsed length: 7.89"
- Extended length: 20.375"
- Minimum bump stop spacing: 2"
- Lifetime warranty against sagging and breaking
- Black powder coat finish
- Allow for longer spring lengths and increased travel
** Require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers
*** Lift heights based on Rubicon models. Other models will see more lift
**** Minimum bump stop listed (2") is the minimum amount of bump stop spacing required to prevent the springs from going into coil bind. Do not use less bump stop spacing.