-
Switch-Pros SP9100 Bezel Style 8-Switch Panel Power System
All Systems now Include: -Dimming for lighting outputs-External trigger to activate up to 2 outputs-Battery Voltage display on app screen Current wait time is approximately 2-3 weeks. Eight user-programmable switches Four 35A circuits and four 18A...$659.99 -
Rugged Ridge A-Pillar 4 Switch Pod Kit (Wrangler JK 2011-2018)
The Rugged Ridge A-Pillar 4 Switch Pod Kit is designed to provide your Jeep Wrangler JK 2011+ with a handy place to mount your accessory switches that doesn't require cutting or modifications. This kit has premolded cutouts allow you to mount up to four...$109.99 -
Daystar Lower Dash Switch Panel (Wrangler JK 07-10)
The Daystar Lower Dash Switch Panel is designed to make adding switches for electric accessories on your Jeep Wrangler JK 2007-2010 easier than ever before. This panel is a direct replacement for your factory dash components and installation is a simple... -
SwitchPros Overhead Mount (Wrangler JK 2007-2018)
Kit Includes:- One (1) overhead mount Overhead mount specifically designed for SwitchPros touch panel Compatible with SP8100-B and SP9100 systems Switch panel NOT included Fits:Jeep Wrangler JK 2 Door (2007-2018)Jeep Wrangler JK 4 Door Unlimited...$52.00 -
Rough Country MLC-6 Multiple Light Controller (Wrangler JK 2007-2018)
The problem with auxiliary lighting, air compressors, and selectable lockers is they all require separate wiring and switches. By the time your Jeep build is complete, it is common to have a bird’s nest of wire and mismatched switches strewn across...$254.95 -
VoSwitch 8 Switch Programmable Control System (Wrangler JK 2007-2018)
Kit Includes:- Power module- Switch panel- Ball and mount clamp- Panel holder- Legends- Piggyback fuse tap- Control wire- Zip ties- Spare main fuse- Terminals- Necessary hardware- Installation instructions Factory look, OE style Switch control system is...$269.00 -
Daystar Lower Dash Switch Panel- No Switches (Wrangler JK 2011-2018)
The Daystar Lower Dash Switch Panel is designed to make adding switches for electrical accessories in your Jeep Wrangler JK 2011+ easier than ever before. This is a direct replacement for factory dash components and installation is a simple remove and... -
sPOD BantamX Switch Panel (Wrangler JK 2009-2018)
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small...$885.00 -
sPOD BantamX Touchscreen (Wrangler JK 2007-2018)
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small...$930.00 -
Rugged Ridge Lower Switch Panel Kit (Wrangler JK 2007-2010)
The Rugged Ridge Lower Switch Panel Kit Kit is designed to provide you with a handy place to mount your accessory switches in your Jeep Wrangler JK 2007-2010 that doesn't require cutting or modifications. This switch has pre-molded cutouts, allowing you... -
sPOD BantamX Add On with 84" Battery Cables | Universal
This is an add-on BantamX for existing sPOD systems/controllers only!! Controller not included At least one sPOD controller must be connected in order for the system to work properly. The BantamX will save hours of wiring & installation time! It is a...$590.00 -
sPOD BantamX Touchscreen Universal with 84" Battery Cables
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small...$930.00 -
sPOD Legends (HD, Mini6, BantamX, SourceLT)
Horizontal Legend Labels used for the following sPOD products: - HD Control Panel - Mini6 Control Panel - BantamX - SourceLT NOTE: These legends are the standard legends supplied with the control panels (HD and Mini6), the BantamX and SourceLT. Full...$7.50 -
AMP Research Powerstep Override Switch with STA Controller
Now you can manually control your AMP Research Powerstep with a temporary over-ride switch. Whether deploying them to wash, or retracting them for off-roading, the switch gives you the flexibility you want in a Powerstep. Kit Includes:- One (1) Powerstep...$169.99 -
Rugged Ridge A-Pillar 4 Switch Pod Kit (Wrangler JK 2007-2010)
The Rugged Ridge A-Pillar Switch Pod Kit is designed to allow you to mount your accessory switches to your Jeep Wrangler JK 2007-2010 in a handy place that doesn't require cutting or other modifications. This switch pod has premolded cutouts, allowing...$109.99 -
sPOD BantamX Add On with 36" Battery Cables | Universal
This is an add-on BantamX for existing sPOD systems/controllers only!! Controller not included At least one sPOD controller must be connected in order for the system to work properly. The BantamX will save hours of wiring & installation time! It is a...$575.00 -
sPod BantamX HD (Wrangler JK 2007-2018)
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small...$930.00 -
sPOD BantamX HD with 36" Battery Cables | Universal
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small...$930.00
Built to Go the Distance
Take advantage of any current sales using code: OESAVE at checkout!
GOT QUESTIONS?
