-
MetalCloak Front Stock Track Bar Relocation Bracket (Wrangler JL & Gladiator JT 2018+)
The Front Stock Track Bar Relocation Bracket for the JL Wrangler and JT Gladiator provides a clean, effective solution for restoring proper axle position and steering control. Engineered for use with the stock track bar, this bracket improves drivability...$99.00 -
MetalCloak Front Sway Bar Disconnect Kit (Wrangler JL & Gladiator JT 2024+)
The Jeep 2024+ JL Wrangler and JT Gladiator Truck Front Sway Bar Quick Disconnect (12" length), by MetalCloak bolt directly into the factory locations and allow for manual disconnect of the front sway bar. Disconnecting the sway bar while off-road...$119.00 -
MetalCloak Front Sway Bar Disconnects | 2500/3500 (Ram 2014+)
The Ram 2500 Truck Front Sway Bar/Quick Disconnects by MetalCloak are built tough and bolt to factory locations. This part allows for manual disconnect of the front sway bar to keep tires on the ground for added stability. Disconnecting the sway bar...$289.00 -
MetalCloak Front Sway Bar Link Extension Kit (Wrangler JL & Gladiator JT 2024+)
MetalCloak JL/JT Extended Sway Bar Links are the extended length links needed for lifted Jeeps that are equipped with factory sway bar disconnect. When Lifting a Jeep the sway bar links also need to increase in length to keep your sway bar adjusted...$54.00 -
MetalCloak Front Sway Bar Link Extension Kit | 14.5" (Wrangler JK, JL & Gladiator JT 2007+)
MetalCloak JKExtended Sway Bar Links are the extended length links needed for lifted Jeeps that are equipped with factory sway bar disconnect. When Lifting a Jeep the sway bar links also need to increase in length to keep your sway bar...$54.00 -
MetalCloak Front Upper Bolt-On Long Arm Mounts | 4 Door (Wrangler JL & Gladiator JT 2018+)
The Upper Front Long Arm Frame Mounts for the JLU Jeep Wrangler are high clearance and tuck up under the Jeep to keep from hanging on obstacles on the trail . Simple drill/bolt on installation with no welding needed. MetalCloak Upper Front JLU Wrangler...$419.00 -
MetalCloak Front Upper DuroTrak A-Arm Kit (Bronco 2021+)
MetalCloak’s Front Upper Durotrak™ A-arms for the Ford Bronco 6G maximize strength for your Bronco’s suspension. Increased clearance allows for additional down travel when using lift braces/spacers of up to 2.5in. Made of thick...$1,099.00 -
MetalCloak Front Upper Shock Mount Kit (Wrangler JL & Gladiator JT 2018+)
The MetalCloak Upper Front Shock Mount Kit for the Jeep JL Wrangler & JT Gladiator is a simple, bolt-on, component that moves the mounting points down to provide maximum shock travel. These beautifully built, CNC formed, 3/16" Steel Plate brackets...$169.00 -
MetalCloak Grade-8 Stock Hardware Upgrade Kit (Gladiator JT 2020+)
MetalCloak's Jeep JT Gladiator Full Replacement Suspension Hardware Kit for(Control Arm, Track Bar & Shock Mount) Hardware Kit is a 94 piece bolt kit that features replacement hardware for all control arms, front/rear track bars and lower shock...$224.00 -
MetalCloak Heavy Duty Front Sway Bar Link Kit (Wrangler JL & Gladiator JT 2018-2023)
MetalCloak's Jeep JL Wrangler and JT Gladiator Truck Premium Front 12” Sway Bar End Links bolt directly into factory locations; these allow for electronic disconnect of the front sway bar. Disconnecting the sway bar while off-road allows your Jeep...$343.00 -
MetalCloak Hi-Steer Front DuroTrak Track Bar (Wrangler JL & Gladiator JT 2018+)
Hi-Steer JL Wrangler Jeep & JT Gladiator Truck Front Durotrak Heavy Duty Adjustable Track Bar is designed strong to meet the demands of on and off-road driving for your lifted Jeep. The Hi-Steer Durotrak adjustable front track bar for the Jeep...$309.00 -
MetalCloak Hi-Steer Track Bar & Bracket Kit (Wrangler JL & Gladiator JT 2018+)
The MetalCloak Front Hi-Steer Track Bar Kit provides the front track bar and the relocation bracket that raises the track bar height; this corrects geometry issues that may lead to bump steer in your Jeep JL Wrangler or JT Gladiator when lifted 4.5...$519.00 -
MetalCloak HydraStrike Rear Bump Stops (Gladiator JT 2020+)
The HydraStrike Nitrogen Charged Hydraulic Bumps are engineered to deliver controlled, repetitive bottom-out performance for aggressive off-road use without compromise. Designed specifically for the rear upper bump location on Jeep JT Gladiators...$939.00 -
MetalCloak Leveling Kit Control Arm Upgrade Kit (Gladiator JT 2020+)
JT Gladiator Rear Duroflex Upgrade Kit has just what you need to add more adjust-ability and strength to get maximum flex for your lifted JT Gladiator Jeep Truck. This kit is specifically designed as the Game Changing upgrade for the MetalCloak JT...$1,715.00 -
MetalCloak Leveling Kit | 2500 | Diesel (Ram 2014+)
MetalCloak's Ram 2500 Leveling Kit, 2014+ raises the front of the truck and takes the rake out of the stance on your Ram. Unique to this leveling kit are 1/4" steel control arm correction brackets that flatten out the front control arm angles to maintain...$1,047.00 -
MetalCloak Lower Front Shock Extension Kit | 2500/3500 (Ram 2014+)
The MetalCloak Lower Front Shock Mount Kit for the Ram 2500/3500 Truck is a simple, bolt-on, component that moves the mounting points up to provide maximum shock travel. The lower front shock mounts are made of strong 3/16” hot rolled steel and...$109.00 -
MetalCloak Premium Front Sway Bar Link Kit (Wrangler JK 2007-2018)
MetalCloak's Jeep JK Wrangler Premium Front 11" - 12” Sway Bar End Links bolt directly into factory locations; these allow for electronic disconnect of the front sway bar. Disconnecting the sway bar while off-road allows your Jeep to achieve the...$346.00 -
MetalCloak Premium Front Sway Bar Link Kit | 11-12" (Wrangler JL & Gladiator JT 2024+)
MetalCloak's Jeep JL Wrangler and JT Gladiator Truck Premium Front 11" - 12” Sway Bar End Links bolt directly into factory locations; these allow for electronic disconnect of the front sway bar. Disconnecting the sway bar while off-road allows your...$356.00
Built to Go the Distance
Take advantage of any current sales using code: OESAVE at checkout!
GOT QUESTIONS?
