null
Created with Sketch.
Skip to main content

By: Motobilt

Motobilt Hammer Series Front Bumper with Fog Mounts & Skid Plate (Wrangler JL & Gladiator JT 2018+)

SKU: MTB-MB1090F-MB1094
$788.00
Free Ground Shipping within the Contiguous US

Motobilt now offers the Jeep JL Hammer front bumper with skid plate and LED fog light holes. It features built in provisions for factory style fog lights and the skid plate is laser cut from 3/16-inch P and O steel and formed on a press brake. The Motobilt Jeep JL Front Hammer Bumper is a 48.5-inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.

The Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.

  • Jeep JL Hammer 48.5-inch front bumper wth skid plate.
  • Fits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited
  • Winch: Our winch bumper is designed to fit a standard mounting pattern of 10" x 4.5" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.
  • Fabricated from 3/16 inch thick high strength steel plate.
  • Bolt on design.
  • 3/4-inch-thick steel d-ring mounts
  • Pass through d-ring mounts weld to the bumper.
  • Fog Light Holes for factory 4 bolt design LED fog lights.
  • Pre-installed riv nuts for 10-24 screws for the factory fog lights.
  • Proudly Made in the USA: Crafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.
  • Sold as each.
  • Weight: 95lbs (approx.)

Notes:
** If installing a winch, MB1002 fairlead mount will also need to be purchased
*** Ships bare steel. Must be painted or powder coated prior to installation to prevent rust
**** No cutting required on the frame rails of your JL.
***** If installing on a Mojave, the skid plate brackets on the lower crash bar will need to be removed for the skid plate to fit.
****** Only LED fog lights will fit. Halogen fog lights will NOT work with this bumper
******* LED fog lights NOT included- available separately
******** If your vehicle is equipped with the fog lights in the photos, they will not work with this bumper

Fits:
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)
Jeep Gladiator JT (2020+)

Adding to cart… The item has been added
5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

Motobilt Hammer Series Front Bumper with Fog Mounts & Skid Plate (Wrangler JL & Gladiator JT 2018+)

Motobilt now offers the Jeep JL Hammer front bumper with skid plate and LED fog light holes. It features built in provisions for factory style fog lights and the skid plate is laser cut from 3/16-inch P and O steel and formed on a press brake. The Motobilt Jeep JL Front Hammer Bumper is a 48.5-inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.

The Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.

  • Jeep JL Hammer 48.5-inch front bumper wth skid plate.
  • Fits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited
  • Winch: Our winch bumper is designed to fit a standard mounting pattern of 10" x 4.5" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.
  • Fabricated from 3/16 inch thick high strength steel plate.
  • Bolt on design.
  • 3/4-inch-thick steel d-ring mounts
  • Pass through d-ring mounts weld to the bumper.
  • Fog Light Holes for factory 4 bolt design LED fog lights.
  • Pre-installed riv nuts for 10-24 screws for the factory fog lights.
  • Proudly Made in the USA: Crafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.
  • Sold as each.
  • Weight: 95lbs (approx.)

Notes:
** If installing a winch, MB1002 fairlead mount will also need to be purchased
*** Ships bare steel. Must be painted or powder coated prior to installation to prevent rust
**** No cutting required on the frame rails of your JL.
***** If installing on a Mojave, the skid plate brackets on the lower crash bar will need to be removed for the skid plate to fit.
****** Only LED fog lights will fit. Halogen fog lights will NOT work with this bumper
******* LED fog lights NOT included- available separately
******** If your vehicle is equipped with the fog lights in the photos, they will not work with this bumper

Fits:
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)
Jeep Gladiator JT (2020+)

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Motobilt Hammer Series Front Bumper with Fog Mounts & Skid Plate (Wrangler JL & Gladiator JT 2018+)

Motobilt Hammer Series Front Bumper with Fog Mounts & Skid Plate (Wrangler JL & Gladiator JT 2018+)

$788.00
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

From our MA shop to your driveway, we deliver trusted gear anywhere.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart