null
Created with Sketch.
Skip to main content

By: Motobilt

Motobilt Front Crusher Bumper with Bull Bar (Wrangler JL & Gladiator JT 2018+)

SKU: MTB-MB1078-B
$799.00
Free Ground Shipping within the Contiguous US

The Motobilt Jeep Wrangler JL Crusher recessed winch bumper with bull bar will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon. The high clearance design includes a built in skid plate also. The bumper is made from 3/16 inch thick steel plate that is laser cut at Motobilt HQ then CNC bent. The bumper uses 3/4 inch thick laser cut d ring mounts that pass through the bumper and are welded both inside and out.

These d ring mounts accept many common sizes of recovery shackles (not included). This setup provides for superior strength.

The bull bar is made out of 1 3/4 inch DOM steel tubing. This is the same material used for roll cages and tube chassis so it is built for strength. The shorter design of the bull bar provides good looks and protects your winch.

The bumper measures in at just 46 inch at its widest point. and provides ample clearance for 40 inch tires. The bumper will ship bare metal and will need to be painted or powder coated once you receive it. It comes with all the necessary mounting hardware.

Kit Includes:
- One (1) front bumper
- Necessary hardware
- Installation instructions

  • Recessed winch bumper
  • Measures 46" at its widest point
  • 3/16" steel plate construction
  • 3/4" laser cut d-ring mounts that pass through the bumper and are welded inside and out
  • 1.75" x .120 wall DOM tube bull bar- braced with laser cut gussets

Notes:
** Ships bare steel for painting or powder coating prior to install. Some prep work may need to be done to remove any imperfections from the manufacturing process, shipping, etc. 
*** You must fully install BEFORE painting and then remove for paint or coating
**** Fairlead spacer included to allow use of a centered or offset winch design
***** Does NOT work with Superwinch Exp
****** Mounting holes or brackets for auxiliary lights are not included, but can be easily drilled upon arrival
******* Due to manufacturing differences, you may need to open up the 8 mounting holes on the Jeep frame slightly.
******** Please allow a 2-3 week lead time for production and shipping.

Fits:
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)
Jeep Gladiator JT (2020+)

Adding to cart… The item has been added
5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

Motobilt Front Crusher Bumper with Bull Bar (Wrangler JL & Gladiator JT 2018+)

The Motobilt Jeep Wrangler JL Crusher recessed winch bumper with bull bar will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon. The high clearance design includes a built in skid plate also. The bumper is made from 3/16 inch thick steel plate that is laser cut at Motobilt HQ then CNC bent. The bumper uses 3/4 inch thick laser cut d ring mounts that pass through the bumper and are welded both inside and out.

These d ring mounts accept many common sizes of recovery shackles (not included). This setup provides for superior strength.

The bull bar is made out of 1 3/4 inch DOM steel tubing. This is the same material used for roll cages and tube chassis so it is built for strength. The shorter design of the bull bar provides good looks and protects your winch.

The bumper measures in at just 46 inch at its widest point. and provides ample clearance for 40 inch tires. The bumper will ship bare metal and will need to be painted or powder coated once you receive it. It comes with all the necessary mounting hardware.

Kit Includes:
- One (1) front bumper
- Necessary hardware
- Installation instructions

  • Recessed winch bumper
  • Measures 46" at its widest point
  • 3/16" steel plate construction
  • 3/4" laser cut d-ring mounts that pass through the bumper and are welded inside and out
  • 1.75" x .120 wall DOM tube bull bar- braced with laser cut gussets

Notes:
** Ships bare steel for painting or powder coating prior to install. Some prep work may need to be done to remove any imperfections from the manufacturing process, shipping, etc. 
*** You must fully install BEFORE painting and then remove for paint or coating
**** Fairlead spacer included to allow use of a centered or offset winch design
***** Does NOT work with Superwinch Exp
****** Mounting holes or brackets for auxiliary lights are not included, but can be easily drilled upon arrival
******* Due to manufacturing differences, you may need to open up the 8 mounting holes on the Jeep frame slightly.
******** Please allow a 2-3 week lead time for production and shipping.

Fits:
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)
Jeep Gladiator JT (2020+)

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Motobilt Front Crusher Bumper with Bull Bar (Wrangler JL & Gladiator JT 2018+)

Motobilt Front Crusher Bumper with Bull Bar (Wrangler JL & Gladiator JT 2018+)

$799.00
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

From our MA shop to your driveway, we deliver trusted gear anywhere.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart