null
Created with Sketch.
Skip to main content

By: Adams Driveshaft

Adams Driveshaft 1350 Front Extreme Duty CV Driveshaft | Dana 60 (Wrangler JL 2018+)

SKU: ADM-ASDJL-1350F-S-D60ULT
$749.95
Free Ground Shipping within the Contiguous US

New Front Extreme Duty Jeep JL Wrangler Rubicon, Sport, and Sahara Models with a Dana 60 Swap 1350 Series Half Round CV Driveshaft. Custom made by Adams Driveshaft.

Now that you own the Newest Generation Wrangler and Upgraded the Front Differential with a Dana 60 1 Ton, then it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential  and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.

FITS A 2018 - Present JEEP JL WRANGLER 2 or 4 DOOR RUBICON - SAHARA- SPORT MODELS. 

MUST HAVE A 1350 PINION YOKE ON THE DIFFERENTIAL. IF YOU DO NOT HAVE ONE WE CAN SUPPLY YOU A FORGED U-BOLT STYLE DANA 60 YOKE FOR AN EXTRA $79.95

This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4" Lift after that the angle may be too Severe or it may Bind.

 We will need a Center of u-joint to Center of u-joint Measurement like the picture shows. Must be measured on the ground at ride height. If you have coil overs then we would need a Collapse, Ride Height, and Full Extension Measurement.

  • Front Driveshaft Part# ASDJL-1350F-S-D60ULT
  • Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Adams Forged Parts, Spicer and Neapco.
  • Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.

Fits:
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)

Adding to cart… The item has been added
5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

Adams Driveshaft 1350 Front Extreme Duty CV Driveshaft | Dana 60 (Wrangler JL 2018+)

New Front Extreme Duty Jeep JL Wrangler Rubicon, Sport, and Sahara Models with a Dana 60 Swap 1350 Series Half Round CV Driveshaft. Custom made by Adams Driveshaft.

Now that you own the Newest Generation Wrangler and Upgraded the Front Differential with a Dana 60 1 Ton, then it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential  and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.

FITS A 2018 - Present JEEP JL WRANGLER 2 or 4 DOOR RUBICON - SAHARA- SPORT MODELS. 

MUST HAVE A 1350 PINION YOKE ON THE DIFFERENTIAL. IF YOU DO NOT HAVE ONE WE CAN SUPPLY YOU A FORGED U-BOLT STYLE DANA 60 YOKE FOR AN EXTRA $79.95

This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4" Lift after that the angle may be too Severe or it may Bind.

 We will need a Center of u-joint to Center of u-joint Measurement like the picture shows. Must be measured on the ground at ride height. If you have coil overs then we would need a Collapse, Ride Height, and Full Extension Measurement.

  • Front Driveshaft Part# ASDJL-1350F-S-D60ULT
  • Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Adams Forged Parts, Spicer and Neapco.
  • Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.

Fits:
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Adams Driveshaft 1350 Front Extreme Duty CV Driveshaft | Dana 60 (Wrangler JL 2018+)

Adams Driveshaft 1350 Front Extreme Duty CV Driveshaft | Dana 60 (Wrangler JL 2018+)

$749.95
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

We deliver trusted gear fast with nationwide fulfillment.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart