Wrangler JK (2007-2018)

EVO MFG Control Arms are made from 2.00 x .281 Wall DOM Tubing. Complete on vehicle adjustability of control arms without removing mounting bolts. Adjustability allows for castor adjustments to be made completely while installed on vehicle. No need to...

EVO MFG Control Arms are made from 2.00 x .281 Wall DOM Tubing. Complete on vehicle adjustability of control arms without removing mounting bolts. Adjustability allows for castor adjustments to be made completely while installed on vehicle. No need to...

EVO SPEC King bump stops provide an additional level of bottoming control when you are using every bit of suspension travel available. 2.0 inch diameter bodies and can handle any suspension arresting loads. EVO SPEC King bump stops contain a unique...

The EVO MFG Rear Roll Center Correction bracket raises the rear trackbar at the axle correcting roll center after lifting the vehicle. Correcting roll center improves on and off road handling and restores the axle to its centered location. Can be used...

The EVO MFG Pair of 3" Bumpstop Spacers are designed to give your Jeep Wrangler JK 3" of height, allowing you to run up to a 37" tire. These spacers are CNC machined from high strength thermoplastic and self tapping hardware is included. Fits:Jeep...

The EVO MFG 4" Enforcer Kit is designed to provide your Jeep Wrangler JK with superior handling both on and offroad and meets the criteria of driving a vehicle heavily on and offroad as well as high speed rides and rock crawling. If you enjoy driving...

The EVO MFG Double Throwdown System is designed to have the same benefits as the EVO Front Coilover System as well as an additional bypass shock in each corner for your Jeep Wrangler JK. This system will give you 12" of position sensitive dampened travel...

The EVO MFG Double Throwdown System is designed to have the same benefits as the EVO Front Coilover System as well as an additional bypass shock in each corner for your Jeep Wrangler JK. This system will give you 12" of position sensitive dampened travel...

The EVO MFG 4" Rear Bump Stop Kit is designed to bolt on to your Jeep Wrangler JK or JL's rear axle. These bump stops are laser cut from 3/16" steel tube with internal strengthening gusset. These are engineered to increase clearance with your rear...

The EVO MFG Rear Double Throwdown EVOlever System with Coilover and Bypass is designed for those who like to go fast in their Jeep Wrangler JK. This system uses a coilover and an additional bypass shock in each corner. The bypass shock allows you to have...

The EVO MFG Rear Rock Stops are a rear air bump system designed to fit your Jeep Wrangler JK. The addition of the air bumps allows for suppressed bottoming out forces which transfers less motion to the driver's seat. This works with stock and lifts JK's...

Adjust your suspension tuning on the fly with the Falcon SP2 3.5 e-Adjust Piggyback Shocks! In addition to the 8-Position Micro Adjust Dial, a 2-Position In-Cab Switch can be manually adjusted from Soft to a preselected Firm setting. Upgrade your Falcon...

Falcon SP2 3.1 Piggyback Shocks deliver increased stability, improved ride quality, and comfort on road, while the increased compression damping provides more aggressive off-road handling. SP2 3.1 Shocks have been optimized for on- and off-road driving...

Inspired by it's off-road racing predecessors, the new Factory Race Series bump stop combines race proven technology with new, cutting-edge features to provide increased damping performance and bottom out control in the last few inches of suspension...

These FOX Racing Shox 2.5 Factory Race Series Reservoir smooth body shocks will give your Wrangler JK enhanced ride quality and the control you need when heading offroad. The 2.5 Factory Race Series shocks use designs from FOX Off-Road racing shocks, so...