null
Created with Sketch.
Skip to main content

By: Turn Offroad

Turn Offroad Front Bumper with Welded Bull Bar & Skid Plate (Wrangler JK, JL & Gladiator JT 2007+)

SKU: TNO-JPFB-04
$749.00
Free Ground Shipping within the Contiguous US

Built for off-roaders who don’t hold back, the Turn Offroad Front Bumper with Integrated Skid Plate and Welded Bull Bar delivers a no-compromise solution for strength, simplicity, and serious trail performance. This high-clearance design offers aggressive protection where it counts and skips unnecessary extras—no fog lights, no clutter, just clean lines and capability.

Constructed from 3–5 mm thick steel and welded inside and out, this bumper is made to take a hit and keep rolling. A fully integrated front skid plate guards your steering and suspension components, while the welded bull bar shields your winch and grille from trail damage. The result? A bumper that’s all business—and all backbone.

  • Extreme High‑Clearance Geometry
    Angled corners and a tight footprint allow for steep approach angles and easy navigation through rocky, technical terrain.
  • Winch-Ready Platform
    Built to accommodate standard-size winches up to 12,000 lb with a reinforced center section and integrated fairlead slot.
  • Thick, High‑Strength Steel Build
    Formed from precision-cut 3–5 mm plate steel and fully boxed for unmatched strength. No weak points. No compromises.
  • Welded Bull Bar
    Heavy-duty 3 mm tube bull bar is welded directly to the bumper for maximum strength. Adds front-end protection without the hassle or flex of bolt-on bars.
  • Integrated Skid Plate
    Welded and ventilated lower skid plate shields your vital steering and suspension components. Tied directly into the bumper structure for rigid, reinforced coverage.
  • Dual 1″‑Thick D‑Ring Mounts
    Welded recovery tabs accept ¾″ shackles and are tied into the frame mounts for safe and secure winching or recovery operations.
  • Tri‑Guard Powdercoat Finish
    Finished with Turn Offroad’s 3-stage Tri-Guard textured black powder coat, featuring a corrosion-resistant primer, UV-stable topcoat, and tough micro-texture for long-lasting performance and good looks.
  • Secure Installation
    Direct bolt-on for JL and JT models.

Fits:
Jeep Wrangler JK 2 Door (2007-2018)
Jeep Wrangler JK 4 Door Unlimited (2007-2018)
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)
Jeep Gladiator JT (2020+)

 

 

Adding to cart… The item has been added
5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

Turn Offroad Front Bumper with Welded Bull Bar & Skid Plate (Wrangler JK, JL & Gladiator JT 2007+)

Built for off-roaders who don’t hold back, the Turn Offroad Front Bumper with Integrated Skid Plate and Welded Bull Bar delivers a no-compromise solution for strength, simplicity, and serious trail performance. This high-clearance design offers aggressive protection where it counts and skips unnecessary extras—no fog lights, no clutter, just clean lines and capability.

Constructed from 3–5 mm thick steel and welded inside and out, this bumper is made to take a hit and keep rolling. A fully integrated front skid plate guards your steering and suspension components, while the welded bull bar shields your winch and grille from trail damage. The result? A bumper that’s all business—and all backbone.

  • Extreme High‑Clearance Geometry
    Angled corners and a tight footprint allow for steep approach angles and easy navigation through rocky, technical terrain.
  • Winch-Ready Platform
    Built to accommodate standard-size winches up to 12,000 lb with a reinforced center section and integrated fairlead slot.
  • Thick, High‑Strength Steel Build
    Formed from precision-cut 3–5 mm plate steel and fully boxed for unmatched strength. No weak points. No compromises.
  • Welded Bull Bar
    Heavy-duty 3 mm tube bull bar is welded directly to the bumper for maximum strength. Adds front-end protection without the hassle or flex of bolt-on bars.
  • Integrated Skid Plate
    Welded and ventilated lower skid plate shields your vital steering and suspension components. Tied directly into the bumper structure for rigid, reinforced coverage.
  • Dual 1″‑Thick D‑Ring Mounts
    Welded recovery tabs accept ¾″ shackles and are tied into the frame mounts for safe and secure winching or recovery operations.
  • Tri‑Guard Powdercoat Finish
    Finished with Turn Offroad’s 3-stage Tri-Guard textured black powder coat, featuring a corrosion-resistant primer, UV-stable topcoat, and tough micro-texture for long-lasting performance and good looks.
  • Secure Installation
    Direct bolt-on for JL and JT models.

Fits:
Jeep Wrangler JK 2 Door (2007-2018)
Jeep Wrangler JK 4 Door Unlimited (2007-2018)
Jeep Wrangler JL 2 Door (2018+)
Jeep Wrangler JL 4 Door Unlimited (2018+)
Jeep Gladiator JT (2020+)

 

 

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Turn Offroad Front Bumper with Welded Bull Bar & Skid Plate (Wrangler JK, JL & Gladiator JT 2007+)

Turn Offroad Front Bumper with Welded Bull Bar & Skid Plate (Wrangler JK, JL & Gladiator JT 2007+)

$749.00
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

From our MA shop to your driveway, we deliver trusted gear anywhere.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart