TeraFlex 4" Alpine PreRunner Long Arm Suspension System | No Shocks | 2 Door (Wrangler JK 2007-2018)

TeraFlex 4" Alpine PreRunner Long Arm Suspension System | No Shocks | 2 Door (Wrangler JK 2007-2018)

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems. The TeraFlex 4" Alpine CT4 Prerunner Long Arm Suspension System includes all the components necessary for a purpose-built speed system. The Alpine CT4 Prerunner builds on the standard Alpine CT4 by adding heavy-duty suspension limit straps and front and rear SpeedBump Bump Stops tuned for high-speed travel. 

Kit Includes:
- Complete set of long arms
- Long arm brackets
- Front and rear coil springs
- Front coil spacers
- Front sway bar disconnects
- Rear sway bar links
- HD forged front adjustable track bar
- HD forged rear adjustable track bar
- Rear track bar bracket
- Stainless steel brake lines
- Front speedbumps
- Rear speedbumps
- Front and rear limiting straps
- Necessary hardware
- Installation instructions

• The Alpine CT4 Prerunner Long Arm Suspension System is built to handle high-speed off-road excursions! Speedbumps provide progressive compression during high speed suspension movement
• Our adjustable Alpine Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 3-6" lifts. On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms.Extensive guessting and brackets to beef up critically weak areas and prevent potential damage
• The HD Forged Adjustable Front and Rear (4"+) Track Bars and Rear Track Bar Bracket improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.
  
• This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat.
• TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).
• Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!
• Does NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Alpine CT4 Prerunner Suspension Systems are offered without shock absorbers. We recommend Falcon Series 3.3 Fast Adjust Piggyback Shocks – available separately.
• Estimated installation time: 20 hours

Notes:
** Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels – NOT INCLUDED.
**** We highly recommend driveshaft modifications such as our High-Angle Rzeppa CV Driveshafts or our High-Angle Rzeppa CV Joint Kit (# 1744014).
***** Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
****** Requires cutting and welding.
******* Alignment required. •
******** Requires longer shocks – we recommend Falcon Series 3.3 Fast Adjust Piggyback Shocks (JK 2dr: # 02-01-33-400-253 or JK 4dr: # 03-01-33-400-253).

Fits:
Jeep Wrangler JK 2 Door (2007-2018)