null
Created with Sketch.
Skip to main content

By: Rough Country

Rough Country 5" Lift Kit | 3500 | Diesel (Ram 2019+)

SKU: RC-37530*
$1,419.95 - $1,429.95
Free Ground Shipping within the Contiguous US

Compliment your RAM 3500's aggressive, good looks with Rough Country's 5-inch Radius Arm Lift Kit. RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!

When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, Clevite Rubber Bushing for maximum vibration absorption. This kit also includes a set of front, lifted coil springs for unparalleled ride quality from your lifted Dodge Ram.

Kit Includes:
- Lifted coil springs
- Radius arms
- Track bar bracket
- Transmission crossmember
- Clocking ring
- Sway bar brackets
- Pitman arm
- Carrier bearing shims
- Rear lift blocks
- U-bolts
- Rear track bar bracket
- Rear sway bar links
- Necessary hardware

  • Increased ground clearance
  • Track bar bracket keeps the front axle properly centered
  • Radius arms offer a more factory-like angle and feature a durable clevite rubber bushing for maximum vibration absorption
  • Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and offroad use
  • Estimated installation time: 6-8 hours

Notes:
** Requires removal of transfer case for clocking ring install for correct front driveline geometry
*** Does NOT fit Power Wagon models
**** Does NOT fit air ride models
***** Fits single rear wheel models and dual rear wheel models
****** Rear wheels may require additional dually wheel spacers to run 12.50" wide tire
******* Only fits diesel models
******** Requires minor cutting for proper installation
********* On vehicles equipped with a two-piece driveshaft and carrier bearing as on the Mega Cab, there is the potential for take-off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing

Fits:
Ram 3500 (2019+) *Diesel models only

Adding to cart… The item has been added
5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

Rough Country 5" Lift Kit | 3500 | Diesel (Ram 2019+)

Compliment your RAM 3500's aggressive, good looks with Rough Country's 5-inch Radius Arm Lift Kit. RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!

When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, Clevite Rubber Bushing for maximum vibration absorption. This kit also includes a set of front, lifted coil springs for unparalleled ride quality from your lifted Dodge Ram.

Kit Includes:
- Lifted coil springs
- Radius arms
- Track bar bracket
- Transmission crossmember
- Clocking ring
- Sway bar brackets
- Pitman arm
- Carrier bearing shims
- Rear lift blocks
- U-bolts
- Rear track bar bracket
- Rear sway bar links
- Necessary hardware

  • Increased ground clearance
  • Track bar bracket keeps the front axle properly centered
  • Radius arms offer a more factory-like angle and feature a durable clevite rubber bushing for maximum vibration absorption
  • Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and offroad use
  • Estimated installation time: 6-8 hours

Notes:
** Requires removal of transfer case for clocking ring install for correct front driveline geometry
*** Does NOT fit Power Wagon models
**** Does NOT fit air ride models
***** Fits single rear wheel models and dual rear wheel models
****** Rear wheels may require additional dually wheel spacers to run 12.50" wide tire
******* Only fits diesel models
******** Requires minor cutting for proper installation
********* On vehicles equipped with a two-piece driveshaft and carrier bearing as on the Mega Cab, there is the potential for take-off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing

Fits:
Ram 3500 (2019+) *Diesel models only

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Rough Country 5" Lift Kit | 3500 | Diesel (Ram 2019+)

Rough Country 5" Lift Kit | 3500 | Diesel (Ram 2019+)

$1,419.95 - $1,429.95
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

From our MA shop to your driveway, we deliver trusted gear anywhere.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart