Not sure what you need?
The Rock Krawler JT 4.5 inch X Factor Mid Arm System was specifically designed for those who want a complete bolt-in installation, maximum articulation from a mid-arm kit and the durability and off-road performance you expect from Rock Krawler Suspension. The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment. Rock Krawler’s industry leading triple rate coils give you 4.5 inches of lift and improves the on-road ride over the factory linear rate springs. All Rock Krawler JT systems includes two rear spring seats, as well as the corresponding two front spring pads. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on-road handling.
Kit Includes:
- Two (2) Triple rate front coil springs
- Two (2) Front adjustable lower control arms
- Two (2) Front adjustable upper control arms
- One (1) Adjustable front track bar
- Two (2) Sway bar disconnects
- Two (2) Front Spring Pads
- Two (2) Sway bar disconnect straps
- Two (1) Carrier bearing drop bracket
- Two (2) Rear adjustable lower control arms
- Two (2) Rear adjustable upper control arms
- Two (2) Quad rate rear coil springs
- Two (2) Extended rear sway bar links
- Two (2) Rear Spring Seats
- One (1) Bolt-on rear track bar relocation bracket
Tire Fitment:
Sport and Overland with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Overland with Trimmed or High Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37”/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)
Wheel Fitment:
Sport and Overland Wheel Fitment Recommendations
37”/38” Tall Tires - Recommend 3.5” of Back Spacing
Rubicon or Sport with Wide Track Axles Fitment Recommendations
37”/38" Tall Tires - Recommend 4.5” of Back Spacing
40” Tall Tires - Recommend 3.5” of Back Spacing
Notes:
** PLEASE ALLOW A LEAD TIME OF 1-3 WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
*** All lift heights based on Rubicon models
**** Designed to maintain 1/2" of rake on Rubicon models
***** As shown valid for OEM axles only
****** If so equipped will require removal of rear shutter shock
******* For tires larger than 37" or hardcore offroad use, welding of the rear cradle to the axle tubes is required
Since 2011, we’ve lived off-road, bringing know-how to every build.
From our MA shop to your driveway, we deliver trusted gear anywhere.
Handpicked from trusted brands for durability, performance, and style.
5-star service, and a team that treats your rig like their own.
