Rock Krawler 3" Pro-X System (Gladiator JT 2020+)

Rock Krawler 3" Pro-X System (Gladiator JT 2020+)

The Rock Krawler JT 3.0 inch Pro-X System was specifically designed for JT owners who want a complete bolt-in installation, maximum articulation from a mid-arm kit and the durability and off-road performance you expect from Rock Krawler Suspension. The triangulated 4 link rear assembly maintains the rear axle perfectly centered; allows for removal of the rear track bar, eliminates rear suspension bind, and the cross talk of the front and rear track bar arrangement greatly smoothing the highway ride. The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment. The Triple Rate front coils paired with our Quad rate rears coils provide unmatched ride quality and off-road performance, while maintaining standard JT rear load capacities. The Rock Krawler Pro-X Gladiator Mid Arm System is the pinnacle of bolt in suspension for the JT platform.

Kit Includes:
- One (1) pair of front springs
- One (1) pair of rear springs
- Four (4) high clearance lower control arms
- Four (4) adjustable upper control arms
- Four (4) spring correction seats
- One (1) adjustable front track bar
- Two (2) front sway bar links
- One (1) Pro-X bolt in rear axle cradle
- Two (2) extended rear sway bar links
- One (1) drill and tap kit
- Necessary hardware
- Installation instructions

• Complete bolt on application
• Excellent highway ride and improved offroad ability
• Bolt in triangulated 4 link rear
• Eliminates front and rear track bar "cross talk"
• Rear axle remains perfectly centered
• Greatly improved rear pinion cycle with equal length rear upper and lower arms
• Lifetime warranty on all hard parts
• Estimated installation time: 4-6 hours

Tire Fitment:
Sport and Overland with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Overland with Trimmed or High Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37”/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)

Wheel Fitment:
Sport and Overland Wheel Fitment Recommendations
37”/38” Tall Tires - Recommend 3.5” of Back Spacing
Rubicon or Sport with Wide Track Axles Fitment Recommendations
37”/38" Tall Tires - Recommend 4.5” of Back Spacing
40” Tall Tires - Recommend 3.5” of Back Spacing

Notes:
** All lift heights based on Rubicon models
*** Designed to maintain 1/2" of rake on Rubicon models
**** As shown valid for OEM axles only
***** For tires larger than 37" or hardcore offroad use, welding of the rear cradle to the axle tubes is required
****** Please allow a lead time of 1-3 weeks for production and shipping. Please feel free to contact us prior to ordering for check on inventory. 

Fits:
Jeep Gladiator JT (2020+)