Rock Jock Sway Bar End Links | 14" Rods | Sealed Ends

Rock Jock Sway Bar End Links | 14" Rods | Sealed Ends

This RockJock Adjustable Sway Bar End Link Set features 14 in. long link rods with 2 5/8 in. of 1/2 in.-20 LH thread and 4 1/4 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application.

The Sealed Rod Ends in this kit are a RockJock exclusive and feature a weatherproof boot for a long life span in all climates.
Link sets are compatible with our Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links.

Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs.

Kit Includes:
- Two (2)  14 in. End Link Rods (gold)
- Two (2)  1/2 in.-20 LH Sealed Rod Ends
- Two (2)  1/2 in.-20 RH Sealed Rod Ends
- Two (2)  1/2 in.-20 LH Jam Nuts
- Two (2)  1/2 in.-20 RH Jam Nuts

• Closed – At maximum trimming of this rod (15/16 in. of thread left on each side and the ends and jam nuts screwed on til they meet the smooth area of the rod), C-C is 12.640 in.
• Extended – Uncut rods with ends installed safely adjust out to 17.640 in. C-C
• These are optional, upgraded links that are compatible with our JL, TJ and LJ rear Antirock Sway Bar Kits
• Wrench flats:  gold rods - 11mm wrench,  sealed rod ends – 18mm wrench,  jam nuts - 3/4 in. wrench
• 14 in. Long
• 1/2 in. Diameter
• 1/2 in.-20 LH Threads – 2 5/8 in. Long
• 1/2 in.-20 RH Threads – 4 1/4 in. Long
• Center Smooth Area – 7 1/8 in. Long

Fits:
(Compatible with) Jeep JL Wrangler Rear AntiRock Sway Bar Kits (2018+)
(Compatible with) Jeep TJ & Unlimited LJ Wrangler Rear Antirock Sway Bar Kits - All
(Compatible with) Universal Antirock Sway Bar Kits - All
Universal Use