Rock Jock Rear Sway Bar End Links | Sealed Rod Ends | 12.5" Rods (Gladiator JT 2020+)

Rock Jock Rear Sway Bar End Links | Sealed Rod Ends | 12.5" Rods (Gladiator JT 2020+)

This RockJock Adjustable Sway Bar End Link Set for the rear of JT Gladiators features 12 1/2 in. long link rods with 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application.

The Sealed Rod Ends in this kit are a RockJock exclusive and feature a weatherproof boot for a long life span in all climates.
Link sets are compatible with our Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links.

Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs.

Being that this specific end link set is designed for the JT rear application, this kit includes 2 of our sealed rod ends for attachment to the axle and 2 thru-bolt heim joints for attachment to the chassis

Kit Includes:
- Two (2) 12.5" link rods
- Two (2) 1/2"-20 LH sealed end link rod ends
- Two (2) 1/2"-20 RH Thru-Bolt heim joints
- Two (2) 1/2"-20 LH jam nuts
- Two (2) 1/2"-20 RH jam nuts
- Four (4) heim misalignment spacers

• Closed – At maximum trimming of this rod (15/16 in. of thread left on each side and the ends and jam nuts screwed on until they meet the smooth area of the rod), C-C is 12.570 in.
• Extended – Uncut rods with ends installed safely adjust out to 15.945 in. C-C
• These are optional, upgraded links that are compatible with our JT Gladiator Sport Suspension Kit, for use in the rear
• Wrench flats:  gold rods - 11mm wrench,  sealed rod ends – 18mm wrench,  heim joints - 19mm wrench,  jam nuts - 3/4 in. wrench

Fits:
Jeep Gladiator JT (2020+)