Rock Jock 3.5" Rear Coil Spring Pair (Gladiator JT 2020+)

Rock Jock 3.5" Rear Coil Spring Pair (Gladiator JT 2020+)

RockJock is famous for our coil springs! The John Currie secret recipe is renowned for being the best on-road ride and the most off-road flex, all in one spring!

Some of the secret (but not all!) to our dual rate springs is a soft initial rate that absorbs small bumps and trail chop, to deliver a smooth, comfortable ride, while a firmer secondary rate helps soak up larger impacts and reduce bottoming.

A key differentiator of RockJock spec. dual-rate springs is the positioning of the crossover point between the initial and secondary spring rates so that a portion of the softer initial rate is available and active at ride height before crossing over to the firmer secondary rate deeper into the travel.

Our 3 1/2 in. lift (over standard model springs) rear coil springs for the 2020-up JT Gladiator directly replace the factory coil springs and are designed to work with RockJock Johnny Joint suspension systems or other manufacturer's 3 to 5 in. lift kits. These springs, besides lifting the vehicle 3 1/2 in., also provide an improved ride.

Kit Includes:
- One (1) pair of rear coil springs

• Free length: 22.250"
• For use in the rear of all models of 2020-up JT Gladiator.
• We recommend installing the proper bump stops in conjunction with these springs. See our RJ-151401-101 rear bump stop kit options.
• Intended for use in gas, V-6 powered vehicles.
• Actual lift amount will vary due to factory produced vehicle variances as well as weight of added on aftermarket equipment.
• You can expect around a 3.5 in. lift in standard models. Rubicon and Mojave models will gain less actual lift because they are already lifted higher than the standard model vehicles from the factory.
• Springs are finished in gloss black powder coat.

Fits:
Jeep Gladiator JT (2020+)