null
Created with Sketch.
Skip to main content

By: MetalCloak

MetalCloak Weld-On DB3 Rear Control Arm Correction Bracket Pair (Wrangler JK 2007-2018)

SKU: MTC-7696
$159.00
Free Ground Shipping within the Contiguous US

The MetalCloak Jeep JK Weld On "DB3" Rear Control Arm Correction Bracket System is the best solution to convert your long arm system back to a mid arm set up.

The MetalCloak DIY weld-on bracket allows for you to convert your rig back to a mid arm set up and re-positions the rear control arms to operate within a corrected radius. This system drastically reduces the feel of bump-steer/axle steer on lifted Jeeps and provides handling characteristics comparable if not better than a stock height Jeep.

The Weld-On DB3 welds directly to the stock location of the factory rear control arm frame brackets that were cut off when installing a long arm kit. The weld on DB3 allows you to fully weld the bracket to the frame and is angled for approach and departure when off-roading. The weld on DB3 comes with fixture spacers that allow you to adjust the parts perfectly to the frame so you know the bracket is aligned when welding.

Feel the improvement in acceleration, braking, climbing and steering performance with the DB3. The DB3 is only available from MetalCloak.
 

Kit Includes:
- DB3 correction brackets
- Bracket spacers
- Necessary hardware

  • Fits JK Wranglers
  • 3/16" Steel
  • CAD Designed
  • Laser Cut
  • Ready To Be Welded
  • Fixture Spacers Included
  • Angled for Approach & Departure
  • Trail-Tested Built-In Skid Plate
  • Raw Metal Finish
  • Made in the USA
  • Estimated installation time: 5-6 hours

Notes:
** PLEASE ALLOW A LEAD TIME OF 1-3 WEEKS FOR PRODUCTION AND SHIPPING. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
*** This alignment bracket pair is designed to be used with adjustable rear control arms. Not to be used with stock control arms
**** Welding is required for proper installation and should be done by a competent welder
***** Builder parts are intended for your own custom application. There is no implied warranty or instructions for the use of these products. If using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk

Fits:
Jeep Wrangler JK 2 Door (2007-2018)
Jeep Wrangler JK 4 Door Unlimited (2007-2018)

 

 

Adding to cart… The item has been added
5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

MetalCloak Weld-On DB3 Rear Control Arm Correction Bracket Pair (Wrangler JK 2007-2018)

The MetalCloak Jeep JK Weld On "DB3" Rear Control Arm Correction Bracket System is the best solution to convert your long arm system back to a mid arm set up.

The MetalCloak DIY weld-on bracket allows for you to convert your rig back to a mid arm set up and re-positions the rear control arms to operate within a corrected radius. This system drastically reduces the feel of bump-steer/axle steer on lifted Jeeps and provides handling characteristics comparable if not better than a stock height Jeep.

The Weld-On DB3 welds directly to the stock location of the factory rear control arm frame brackets that were cut off when installing a long arm kit. The weld on DB3 allows you to fully weld the bracket to the frame and is angled for approach and departure when off-roading. The weld on DB3 comes with fixture spacers that allow you to adjust the parts perfectly to the frame so you know the bracket is aligned when welding.

Feel the improvement in acceleration, braking, climbing and steering performance with the DB3. The DB3 is only available from MetalCloak.
 

Kit Includes:
- DB3 correction brackets
- Bracket spacers
- Necessary hardware

  • Fits JK Wranglers
  • 3/16" Steel
  • CAD Designed
  • Laser Cut
  • Ready To Be Welded
  • Fixture Spacers Included
  • Angled for Approach & Departure
  • Trail-Tested Built-In Skid Plate
  • Raw Metal Finish
  • Made in the USA
  • Estimated installation time: 5-6 hours

Notes:
** PLEASE ALLOW A LEAD TIME OF 1-3 WEEKS FOR PRODUCTION AND SHIPPING. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
*** This alignment bracket pair is designed to be used with adjustable rear control arms. Not to be used with stock control arms
**** Welding is required for proper installation and should be done by a competent welder
***** Builder parts are intended for your own custom application. There is no implied warranty or instructions for the use of these products. If using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk

Fits:
Jeep Wrangler JK 2 Door (2007-2018)
Jeep Wrangler JK 4 Door Unlimited (2007-2018)

 

 

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
MetalCloak Weld-On DB3 Rear Control Arm Correction Bracket Pair (Wrangler JK 2007-2018)

MetalCloak Weld-On DB3 Rear Control Arm Correction Bracket Pair (Wrangler JK 2007-2018)

$159.00
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

From our MA shop to your driveway, we deliver trusted gear anywhere.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart