-
Body Armor 4x4 Pro Series Rear Bumper (Tacoma 2016-2023)
Enhance the look of your 2016-2023 Toyota Tacoma with the Body Armor 4x4 PRO-Series Rear Bumper. Featuring sleek, modern styling, this bumper upgrades your vehicle from the stock option and suits both street and trail use. It easily replaces the factory...$759.00 -
Body Armor 4x4 Pro Series Tire Carrier | Fits TC-2961 Only (Tacoma 2005-2015)
2" square tube design Attaches to Tacoma rear bumper TC-2961 Carries up to 35" tall tire Easy no-drill installation Fits:Toyota Tacoma Gen 2 (2005-2015)$558.00 -
Body Armor 4x4 PRO-Series Front Winch Bumper (Tacoma 2016-2023)
Update the appearance of your 2016-2020 Toyota Tacoma by installing a Body Armor 4x4 PRO-Series Front Bumper. With clean, simple styling that surpasses the boring stock bumper, this Pro-Series Front Bumper looks perfectly at home on both the street and...$1,415.00 -
Body Armor 4x4 Sky Ridge Pike Awning
The Body Armor Sky Ridge Pike Awning provides 43 square feet of covered space for shade while relaxing or cooking. Easily mounts to most Jeep roof racks and Gladiator bed racks. Made from 4420D Ripstop Polyester Oxford fabric that is...$275.00 -
Body Armor Ambush Rear Bumper | 1500 (Ram 2019+)
Body Armor 4x4 was founded with the vision to provide high quality durable products for the off road community. Their products are engineered to stand up to abuse and functional while enhancing the looks of the vehicle that they are installed on. At Body...$1,139.00 -
Body Armor Backbone for 2" Hitch Receiver
If you are going to do a lot of off-roading the Backbone from Body Armor 4x4 is an essential accessory to have for your Jeep. This handy 4-in-1 tool acts as a skid plate, wheel chock, recovery point & a step fitting right into your 2" hitch...$173.00 -
Body Armor Bed Protector (Gladiator JT 2020+)
The Body Armor Bed Protector for Jeep Gladiator JT that is equipped with a Body Armor JT-2965 Rear Bumper is made from a 3/16" steel plate. This rear bumper Bed Protector is available in a two-stage light textured black finish. The wrap-around...$184.00 -
Body Armor Bumper Step (Gladiator JT 2020+)
The Body Armor Bed Step for Jeep Gladiator JT that is equipped with a Body Armor JT-2965 Rear Bumper is made from a 3/16" steel plate. This rear bumper Bed Step is available in a two-stage light textured black finish. The Bed Step is...$184.00 -
Body Armor ECO Series Front Bumper | 1500 (Ram 2013-2018)
The new ECO-Series bumper adds strength and protection as well as style. Body Armor have taken extra steps to include multiple pockets in the center of the bumper to insure maximum airflow in the intercooler for the ECO-Boost rigs. This bumper also...$1,100.00 -
Body Armor ECO Series Rear Bumper | Dual Exhaust Only | 1500 (Ram 2009-2018)
Body Armor 4x4 produces extreme off-road equipment for Jeeps and trucks. The company was founded in the 1990s in Corona, California. Body Armor engineers its products to withstand the abuse of the trail over and over while personalizing the look of your...$1,100.00 -
Body Armor Fabricated Grille Guard for Body Armor Front Bumper (Wrangler JL & Gladiator JT 2018+)
Kit Includes:- One (1) front grille guard- Necessary hardware 3/16″ Steel plate construction Bolt on design for all body armor 4×4 JL front bumpers 20″ Single row light opening Two-stage light texture finish in black Notes:** This...$156.00 -
Body Armor Front Fender Flares (Wrangler JL & Gladiator JT 2018+)
Kit Includes:- One (1) pair of front fender flares- Necessary hardware 3/16″ steel plate Front flare set High clearance flat design Provides 7″ of coverage Includes dot approved switch back driving light Two-stage powder coat light texture...$600.00 -
Body Armor Front Mid Width Winch Bumper (Wrangler JL & Gladiator JT 2018+)
If you want to mount a winch on your Jeep Wrangler JL or Gladiator JT chances are you are going to need a new front bumper. What better way to upgrade your front bumper then with a Front Mid Width Winch Bumper from Body Armor 4x4. With a mid...$644.00 -
Body Armor Full Width Front Bumper (Wrangler JL & Gladiator JT 2018+)
If you want to mount a winch on your Wrangler or Gladiator chances are you are going to need a new front bumper. What better way to upgrade your front bumper then with a Front Full Width Winch Bumper from Body Armor 4x4. This bumper can mount... -
Body Armor Full Width Front Winch Bumper (Wrangler JK, JL & Gladiator JT 2018+)
The Body Armor Full Width Front Winch Bumper offers complete front end protection for your Jeep Wrangler JK, JL and Gladiator JT. This bumper will accept most winches up to 12,000 lbs. including the Warn Zeon Winches and includes fully welded...$823.00 -
Body Armor Gen III Front & Rear Trail Door Package | 4 Door (Wrangler JK 2007-2018)
The New Body Armor Trail Doors are a Steel tube construction with durable black textured powder coat finish. Featuring an Exclusive hidden internal latch mechanism designed for secure closure. Steel plate gussets for style and strength. Simple...$1,058.00 -
Body Armor Hinge Step Pair (Wrangler JK, JL & Gladiator JT 2007+)
Help Gain Better Roof Access Help make it easier to access roof racks or put covers on your Jeep with this hinge step from Body Armor. This step is created with a 1/8 steel plate construction that also features a two-stage light texture powder coat which...$101.00 -
Body Armor Orion Front Bumper (Wrangler JK, JL & Gladiator JT 2007+)
Kit Includes:- One (1) front bumper- Necessary hardware- Installation instructions High clearance design for better approach and departure angles Allows clearance for larger tires Compact design fit nice and tight while offering increased protection...$932.00
Built to Go the Distance
Take advantage of any current sales using code: OESAVE at checkout!
GOT QUESTIONS?
