Dirt King Fabrication Long Travel Kit (Tacoma 2005-2023)

Dirt King Fabrication Long Travel Kit (Tacoma 2005-2023)

The Dirt King long travel kit was developed to drastically improve the vehicles off-road handling without compromising its day to day driving characteristics. This suspension system allows for 13.5” of travel and accepts up to a 35” tire. The kit is compatible with 2WD models and 4WD models along with the purchase of extended axle shafts. Our upper and lower arms are designed with 1” stainless steel uniballs for the outer pivots instead of ball joints for strength and increased articulation. Compared to the competition we’ve gained several inches of ground clearance by mounting the lower arms in the factory location instead of below it. This kit is CAD designed, thoroughly tested, and 100% made in America resulting in a product we’re proud to put our name on!

Kit Includes:
- Boxed plate upper control arms
- Boxed plate lower control arms
- 8" quad wrapped limit straps
- Weld-on adjustable limit strap mounts
- Misalignment spacers
- Tie rod extensions
- DOT approved extended brake lines
- Bump stop spacers
- Necessary hardware
- Installation instructions

• Bolt on application
• Minimal modifications required
• Utilizes American made FK bearings
• Choice of heims or poly bushings for the upper control arms
• 4130 chromoly uniball cups
• Delrin bushings for lower control arms
• Zinc plated inner bushing sleeves
• Grease fittings for easy servicing
• 3/16" and 1/8" boxed plate construction
• Internally ribbed with extrusions for weight reduction
• Bump stop plating
• Limit strap plating
• Bypass tabbing

Specifications:
- Wheel Travel: 13.5"
- Amount of Lift: 0-4"
- Track Width: 3.5" wider per side
- Maximum Tire Size: 35"
- Maximum Backspacing: 4.75"
- Minimum Rim Size: 16"
- Coil over Shock Size: 2.5" x 8"
- Bypass Shock Size: 2.5" x 8"
- Bump Stop Size: 2.0 x 2.0

Notes:
** Please allow a lead time of 3 weeks for production and shipping
*** To achieve the full amount of travel on 4WD models, you must install the 1" diff drop kit and machine the inner CV's for more articulation
**** When using 35" tires, the firewall pinch weld will need to be folded over and front cab mount needs to be shaved to avoid contact while turning. The upper wheel well will also need to be modified to avoid contact at full bump.

Fits:
Toyota Tacoma Gen 2 (2005-2015)
Toyota Tacoma Gen 3 (2016-2023)