null
Created with Sketch.
Skip to main content

By: Carli Suspension

Carli Suspension 2" Pintop System | R2 Coils | 2500 | Power Wagon (Ram 2019+)

SKU: CRLI-CS-DPT25-19-PW-R2
Free Ground Shipping within the Contiguous US

 

Kit Includes:
- Rear sway bar end links
- Front bump drops
- Front linear coil springs
- Rear multi-rate coil springs
- Front track bar
- Radius arm drops
- Transmission crossmember
- Rear bump drops
- Rear track bar drop
- King remote reservoir shocks
- Harmonic damper relocation bracket
- PW skid plate spacer block

  • Front Lift: 2"
  • Rear Lift: 0.5-2"
  • Front Travel: 9.3"
  • Rear Travel: 11"
  • 2.5" King Remote Reservoir Shocks
  • Tire Fitment: 37x12.5

Add Ons:
- Front Sway Bar- The Factory Sway Bar Disconnect with which the Power Wagons are equipped works great for those wanting the two ends of the spectrum, rigid or flexy. For those wanting to land in the middle of the spectrum between these two end points, Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension when compared to the locked, factory sway bar. The Carli Sway Bar allows nearly bind-free articulation in low-speed applications; when things heat up, it allows the Carli Shocks and springs to breath while engaging progressively to provide control in high-speed cornering situations.
- Low Mount Steering Stabilizer- Bolt in steering stabilizer (factory location). Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that's infinitely adjustable.
- High Mount Steering Stabilizer- Bolt in stabilizer adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the right-hand pull inherent to tires like Toyo Mud Terrains.
- Radius Arms- Icing on the cake, these arms add Limit Strap Protection for your Front Shocks, 1/4" Boxed Steel Construction, and Serviceable 3" - 17-4 Stainless Steel Spherical Bearings.
- Front Differential Guard- Better to have it and not need it than need it and not have it.
- Ball Joints- Do your ball joints once, grease every oil change and forget they exist...

Fits:
Dodge Ram 2500 (2019+) *Power Wagon models only

5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

Carli Suspension 2" Pintop System | R2 Coils | 2500 | Power Wagon (Ram 2019+)

 

Kit Includes:
- Rear sway bar end links
- Front bump drops
- Front linear coil springs
- Rear multi-rate coil springs
- Front track bar
- Radius arm drops
- Transmission crossmember
- Rear bump drops
- Rear track bar drop
- King remote reservoir shocks
- Harmonic damper relocation bracket
- PW skid plate spacer block

  • Front Lift: 2"
  • Rear Lift: 0.5-2"
  • Front Travel: 9.3"
  • Rear Travel: 11"
  • 2.5" King Remote Reservoir Shocks
  • Tire Fitment: 37x12.5

Add Ons:
- Front Sway Bar- The Factory Sway Bar Disconnect with which the Power Wagons are equipped works great for those wanting the two ends of the spectrum, rigid or flexy. For those wanting to land in the middle of the spectrum between these two end points, Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension when compared to the locked, factory sway bar. The Carli Sway Bar allows nearly bind-free articulation in low-speed applications; when things heat up, it allows the Carli Shocks and springs to breath while engaging progressively to provide control in high-speed cornering situations.
- Low Mount Steering Stabilizer- Bolt in steering stabilizer (factory location). Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that's infinitely adjustable.
- High Mount Steering Stabilizer- Bolt in stabilizer adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the right-hand pull inherent to tires like Toyo Mud Terrains.
- Radius Arms- Icing on the cake, these arms add Limit Strap Protection for your Front Shocks, 1/4" Boxed Steel Construction, and Serviceable 3" - 17-4 Stainless Steel Spherical Bearings.
- Front Differential Guard- Better to have it and not need it than need it and not have it.
- Ball Joints- Do your ball joints once, grease every oil change and forget they exist...

Fits:
Dodge Ram 2500 (2019+) *Power Wagon models only

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

From our MA shop to your driveway, we deliver trusted gear anywhere.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart