Banks Power Derringer Tuner with iDash SuperGauge DataMonster | 3.0L Diesel (Wrangler JL & Gladiator JT 2018-2023)

Banks Power Derringer Tuner with iDash SuperGauge DataMonster | 3.0L Diesel (Wrangler JL & Gladiator JT 2018-2023)

Control your Jeeps speed and acceleration with the Banks Power Derringer Tuner with iDash SuperGauge DataMonster, for diesel engines. The Derringer has been dyno calibrated to use multiple data inputs such as throttle position, rpm, vehicle speed, AFR, knock, coolant temperature, and EGT, just like your engine's ECM, to actively and safely optimize calibrations in real-time. With 6 levels of adjustable on-the-fly tuning you can increase your on-ramp merging speeds and passing times while still hauling a fully loaded trailer, and reduce the calibration for long hauls to regain the max fuel economy. The DataMonster gauge can be switched to Data Logging mode where it records up to 20 samples per second of 100 different parameters that are not shown by your traditional dash. View the data directly on the color gauge screen or import the data to your computer with the included Micro SD Card and view with any program using .csv file extensions. The Derringer connects in line with your truck's engine sensors. But unlike other tuners, it also connects to the vehicle's OBD-II diagnostic bus. ActiveSafety health monitoring circuitry keeps an eye on the vehicle and the module itself, checking its health 100 times a second. If it detects an issue, the Derringer instantly bypasses itself, sets a device diagnostic code, and seamlessly returns the truck to stock power.

Kit Includes:
- One (1) Derringer tuner
- One (1) iDash SuperGauge DataMonster
- One (1) micro SD card and adapter
- One (1) OBDII connection harness
- Wiring harness
- Installation instructions

• Adds up to 57 HP and 73 lb-ft
• 4.3 truck length lead in the 1/4 mile
• 0-60 MPH 1 second faster
• 6 power levels that can be changed on the fly via iDash. Each level adds approx 11-12 HP
• Logs up to 100 parameters at 20hz for hundreds of hours of data logs
• Plug and play installation with easy removal for dealer service
• Interfaces with OBD-II port (on-board diagnostics) to communicate with your vehicles ECM
• Warranty friendly; no re-flash required and no traces left in ECM
• Works while in cruise-control
• ActiveSafety protects engine/powertrain
• Dash displays dozens of temps, pressures, speeds and info your dash doesn't
• iDash displays 5 customizable pages of 2-8 gauges per page
• iDash displays DPF regen status, distance between regens, DEF level
• Real-time bar graph displays Derringer's added power
• 1 year limited warranty
• Estimated installation time: 2-3 hours

CARB Notice
Legal in California, or other states adopting California emissions standards, only for racing vehicles that may never be used, registered or licensed for use, upon a highway. Can not be shipped to California residents.

Fits:
Jeep Wrangler JL 4 Door Unlimited (2018-2023)
Jeep Gladiator JT (2020-2023)