null
Created with Sketch.
Skip to main content

By: AWE Exhaust

AWE Tread Edition Axle-Back Dual Exhaust | Chrome Tips (Wrangler JK 2012-2018)

SKU: AWE-3015-32003
Free Ground Shipping within the Contiguous US

The Jeep Wrangler exhaust that will sound good no matter where you are on the planet. 

Handcrafted from US-made 3” and 2.5” T304L stainless steel, the Tread Edition is a straight-through axle-back configuration for drivers looking for rugged performance and a drone-free, signature exhaust note without sacrificing daily-drivability.

The Tread Edition features AWE’s patented, drone-canceling 180 Technology, which provides the Jeep with a sophisticated, full-bodied soundtrack completely controllable via the throttle. With increased throttle, the Wrangler roars with aggression, but at highway speeds, the cabin is free of any drone, and volume is like stock. 

Perfect tone, compliments of AWE 180 Technology. 

As exhaust gases exit the 3.6L engine and flow into an AWE 180 Technology equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.

  • Handcrafted from 3” and 2.5” U.S.-made CNC mandrel-bent .065” wall T304L stainless steel
  • Perfected for both 2-door (JK) and 4-door (JKU) applications
  • Proudly engineered, designed, and manufactured in-house, in the USA
  • Resonated and Non-Resonated Mid Pipes available separately
  • Dyno-verified max gains of 5 hp and 10 lb-ft of torque at the wheels
  • Direct bolt-on for factory-like simplicity, no cutting required
  • Less is more: clean, straight-through design maximizes performance
  • Dual 4.5” slash-cut, double-walled tips in Chrome Silver
  • Dyno-engineered, trail-proven
  • Perfect fitment, guaranteed
  • AWE No CEL Guarantee
  • Lifetime Warranty on exhaust
  • 180 Technology: Yes
  • 50 State Legal: Yes
  • Edition: Tread Edition
  • Fit Gurantee: Yes
  • Material: T304L Stainless Steel
  • No CEL Guarantee: Yes
  • System Type: Axle Back
  • Tip Diameter: 4.5 in
  • Tip Diameter: 114 mm
  • Tip Finish: Chrome Silver
  • Tip Qty: 2
  • Tune Required: No
  • Valves: No

Fits:
Jeep Wrangler JK 2 Door (2012-2018)
Jeep Wrangler JK 4 Door Unlimited (2012-2018)

5 Star Customer Service
Price Match Guarantee

Not sure what you need?

Product Description

AWE Tread Edition Axle-Back Dual Exhaust | Chrome Tips (Wrangler JK 2012-2018)

The Jeep Wrangler exhaust that will sound good no matter where you are on the planet. 

Handcrafted from US-made 3” and 2.5” T304L stainless steel, the Tread Edition is a straight-through axle-back configuration for drivers looking for rugged performance and a drone-free, signature exhaust note without sacrificing daily-drivability.

The Tread Edition features AWE’s patented, drone-canceling 180 Technology, which provides the Jeep with a sophisticated, full-bodied soundtrack completely controllable via the throttle. With increased throttle, the Wrangler roars with aggression, but at highway speeds, the cabin is free of any drone, and volume is like stock. 

Perfect tone, compliments of AWE 180 Technology. 

As exhaust gases exit the 3.6L engine and flow into an AWE 180 Technology equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.

  • Handcrafted from 3” and 2.5” U.S.-made CNC mandrel-bent .065” wall T304L stainless steel
  • Perfected for both 2-door (JK) and 4-door (JKU) applications
  • Proudly engineered, designed, and manufactured in-house, in the USA
  • Resonated and Non-Resonated Mid Pipes available separately
  • Dyno-verified max gains of 5 hp and 10 lb-ft of torque at the wheels
  • Direct bolt-on for factory-like simplicity, no cutting required
  • Less is more: clean, straight-through design maximizes performance
  • Dual 4.5” slash-cut, double-walled tips in Chrome Silver
  • Dyno-engineered, trail-proven
  • Perfect fitment, guaranteed
  • AWE No CEL Guarantee
  • Lifetime Warranty on exhaust
  • 180 Technology: Yes
  • 50 State Legal: Yes
  • Edition: Tread Edition
  • Fit Gurantee: Yes
  • Material: T304L Stainless Steel
  • No CEL Guarantee: Yes
  • System Type: Axle Back
  • Tip Diameter: 4.5 in
  • Tip Diameter: 114 mm
  • Tip Finish: Chrome Silver
  • Tip Qty: 2
  • Tune Required: No
  • Valves: No

Fits:
Jeep Wrangler JK 2 Door (2012-2018)
Jeep Wrangler JK 4 Door Unlimited (2012-2018)

NEED ASSISTANCE?

NEED ASSISTANCE?
Call us 774-826-9948 Mon - Fri
9 am - 6 pm (Eastern Time)
Email Us Sales@Offroadelements.com Expect a reply
within 24 hours
Visit Us 1209 Bedford Street, Abington, MA 02351 Get Directions
Passion Built Expert Backed

Passion Built
Expert Backed

Since 2011, we’ve lived off-road, bringing know-how to every build.

Local Roots Nationwide Reach

Local Roots
Nationwide Reach

We deliver trusted gear fast with nationwide fulfillment.

Only Gear We’d Run Ourselves

Only Gear
We’d Run Ourselves

Handpicked from trusted brands for durability, performance, and style.

Your Adventure Our Commitment

Your Adventure
Our Commitment

5-star service, and a team that treats your rig like their own.

My Cart