Adams Driveshaft Front 1310 CV Driveshaft OEM Flange Style (Gladiator JT 2020+)

Adams Driveshaft Front 1310 CV Driveshaft OEM Flange Style (Gladiator JT 2020+)

New Front Extreme Duty Jeep JT Gladiator Rubicon - Overland - Sport - Mojave 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams

Now that you own the Newest Generation Jeep Gladiator, it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

This OEM Flange Extreme Duty Series Solid 1310 CV Driveshaft will work up to 35" Tall Tires, after that size we recommend upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the Strongest driveshaft for your Jeep. This Driveshaft will work up to a 4 1/2" Lift after that the angle may be too Severe or Bind.

We do know most of the measurements of your JT, but there are some we do not due to the many different size of lifts, and differentials.

• Front Driveshaft Part# ASDJT-1310F-S
• Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
• Has Long Full Spline Slip n Stub unlike some of our Competitors.
• Built only with Components made by Spicer and Neapco.
• Has the Strongest Solid Non Greasable U-joints on the Market.
• Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't Disturb the Crush Sleeve.
• Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors comes with Grade 8.

Notes:
** Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential or Axle Kit that Eliminates the [FAD] front axle disconnect and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles. NOT FOR 392 MODELS. Adams only makes 1350 Series driveshafts for the 392 due to horsepower. 
*** If you have coilovers, Rock Krawler brand lift, a lift higher than 4.5", have installed a different T-case or a different differential, we will need you to get us a measurement. Please leave the measurement in the order comments or call/email us as soon as possible. Use the measurement chart in the photos for guidance if needed.

Fits:
Jeep Gladiator JT (2020+)