Adams Driveshaft 1350 Rear 2-Piece CV Driveshaft (Gladiator JT 2020+)

Adams Driveshaft 1350 Rear 2-Piece CV Driveshaft (Gladiator JT 2020+)

This new Extreme Duty Series rear 2 Piece Solid U-joint 1350 CV Driveshaft is no doubt the strongest on the market. We use the same Adams FORGED components in Matt's offroad Recovery [the world's largest offroad wrecker]. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Gladiator. This Driveshaft will work up to a 6" Lift, after that the angle may be too Severe and could cause a slight vibration on or off the Throttle.

• Rear Driveshaft Part # ASDJT-1350R-S-2PC
• The Front section is made out of 3 " X .083 Wall D.O.M. Tubing and the Rear section is made out of 2 ½ x .095 wall D.O.M.
• Has Long 1 1/2" Full Spline Slip with a Long 1 1/2" spline slip yoke with a 35 Degree Angle.
• Built mostly with Adams Driveshafts forged components and the rest with Neapco and Spicer.
• Has the Strongest Solid Non Greasable U-joints on the Market. If you Break the U-joint by Torque, we'll replace it.
• Comes with a Forged Rear U-bolt Style Dana 44 Pinion Yoke that supports the U-joint Cap Halfway around unlike our Competitors.
• Comes with a Solid Steel Rear transfer case Flange yoke with Grade 10 CV Bolts.

Notes:
** Please enter your year, make, model and lift size in the order comments when you check out, or you can call/email us after you make the purchase. 
*** If you have a custom build (Atlas, coilovers, etc) please use the measurement chart in the photos with your Jeep sitting at ride height

Fits:
Jeep Gladiator JT (2020+)