JKS Rear Adjustable Trackbar 0-6" Lift (Wrangler JK 2007-2018)
Rear Adjustable Trackbar for JK
The JKS Manufacturing Rear Adjustable Trackbar is designed to be an essential upgrade to your lifted Jeep Wrangler JK if you're still using the OE trackbar. The length is easily adjusted to center the axle housing beneath your vehicle. This trackbar is compatible with virtually any suspension system and allows for constant changes as your vehicle modifications require. The ends feature bushings chosen to provide maximum offroad performance while minimizing the transfer of road noise and vibrations.
- One (1) track bar
- Necessary hardware
- Installation instructions
- Manufactured from 1.25" x .250" DOM tubing
- Formed on mandrel bender
- Ensures proper geometry and optimum clearance
- Properly aligns axle housing with chassis on coil sprung Jeeps
- Prevents undue stress on related components and centers swaybar for proper disconnect operatio
- Ultra-strong, DOM tube construction is shaped for correct geometry and clearanc
- Zinc plated and powder coated for excellent protection from corrosion and debris
Trackbar Relocation Bracket: Reccomended for Vehicles lifted 2" or more
Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV-type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points.Our Relocation Brackets also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time. Vehicles lifted over 3.0" must be equipped with adjustable rear track bar (JKS PN OGS159 or equivalent) and/or adjustable upper control arms (JKS PN 7155 or equivalent).